Driven Performance

Account | Cart | Checkout

Shopping Cart
Qty	0
Total(NZ$)	0.00

Brands

MAP-ECU 2 Engine management unit

The MAPECU2 (Manifold Absolute Pressure Electronic Control Unit) is a major functional upgrade over the MAP-ECU, now offering a suite of features:

* Fuel control and Air Flow Meter replacement
* Timing control with +/-30 degrees adjustment. Full timing advance and retard control of up to eight (8) channels for Distributor, Group Fire or Coil On Plug configurations using a 20 x 19 (380 zone) table.
* Two (2) complete sets of Fuel, Timing, Auxiliary Injector, O2 Adjust and EBC tables selectable using a dashboard mounted switch.
* OEM O2 Sensor Adjust 26 x 19 (494 zone) table allowing control over Air/Fuel ratios, even in Closed-loop mode.
* Auxiliary Injector control using a 20 x 19 (380 zone) table.
* Electronic Boost Control with ten (10) zones every 1000 RPM
* 0-10,000 RPM. 200 rpm increments 0-2000, 500 rpm increments 2000-10,000 for Fuel and O2 Adjust tables. 500 rpm increments 0-10,000 for Timing and Auxiliary Injector tables.
* Built-in MAP sensor, +35 PSI. Pressure scale is user configurable using a MAP-CAL.
* Frequency based Speed Cut Defender (SCD).
* Frequency based Speed Adjust
* Voltage based Fuel Cut Defender (FCD)
* Launch Control - Target RPM and Clutch Switch input.
* Two Complete (2) maps (Primary/Secondary) for Fuel, Timing, Auxiliary Injector, O2 Adjust & EBC - selectable using one of the configurable inputs.
* Support for optional external MAP sensor input.
* User selectable pressure scale configurations
* Plug compatible with current MAP-ECU harness.
* Three (3) multi-function high current switched outputs configurable as follows:
• NOS solenoid drive
• RPM>0
• Pressure Switch
• RPM Switch
• EBC
• Auxiliary Injector
* Upgradeable software stored in Flash memory that can be downloaded using MAP-CAL. Does not require removal of MAP-ECU2 from vehicle.
* More horsepower and torque by removal of the restrictive factory air meter and control over timing.
* The ability to use the stock ECM to control larger fuel injectors and/or performance upgrades.
* Alter OEM Air/Fuel ratios, even in Closed-Loop mode, for improved gas mileage or power.
* Retains the daily driveability of the stock ECM which is usually sacrificed with a full aftermarket engine management upgrade.
* Real-time tuning using Window™ based MAP-CAL2 software supplied with the unit.
* High-resolution 494 point Fuel table (0-10,000 RPM and -10 to +35 PSI) allows fine tuning for performance and driveability.
* Ability to run different fuels or performance levels using two (2) completely independent Fuel, Timing, O2 Adjust, Auxiliary Injector and Boost Control tables switchable on-the-fly.
* Built-in display and logging of key engine parameters such as RPM, Throttle Position, Boost Pressure, Airflow, Timing Adjust, Auxiliary Injector Duty, Boost Control Duty.
* On-board support for display and logging of popular aftermarket wideband Lambda sensors/controllers.
* On-board programmable NOS window activation switch can also be used to turn on other accessories at set RPM/PSI points.
* Faster and stronger boost with the on-board programmable Electronic Boost Control (EBC) using solenoid control of the wastegate.
* Fast and repeatable launches using the on-board programmable Launch Control.
* Removal of factory Fuel and Speed Cuts using the on-board programmable Fuel Cut Defender and Speed Cut Defender.
* Compensate for wheel size or gearing changes with the on-board programmable Speed Adjust.
* Drive a Shift Light or alter VTEC™ point with the on-board programmable RPM Switch.
* Single unit can be used for Naturally Aspirated or forced induction applications with user selectable pressure scale configuration.
* Simple upgrade from MAP-ECU using the same 16-Way harness and ability to import and convert V2.1 and V2.2 Fuel tables.
* Simple piggy-back installation only requires 7 wires to operate with no major re-wiring of OEM components.

The MAP-ECU2 kit includes: MAP-ECU2, Main 16-Way harness, 18-Way Timing Harness, PC CDROM software, 2 metre serial cable, Inlet Air Temp (IAT) sensor and manual in PDF format.

The MAP-ECU(2) works on most Domestics and Imports, e.g.
Alfa Romeo
BMW
Porsche
Toyota
Lexus
Mitsubishi
Nissan
Infinity
Honda
Acura
Subaru
Mazda
Proton
Hyundai and most other late model fuel injected vehicles using most major types of air metering systems (Hotwire, Flap, and Karman-Vortex) found in use today. It can be installed on any 1-10 cylinder engine in less than an hour, and completely replaces the restrictive factory air meter. 'No special fitting kits or special adaptors are required'

Product Reviews :
Write a review

Miscellaneous :
Email a Friend
Product Inquiry

Ready To Order?

List Price: ~~NZ$999.99~~
Our Price: NZ$949.99
You Save: NZ$50.00 (5%)
Price excludes GST

Related Products :

All > Electronics

100% NZ Owned!

News
* INTERNET BANKING * Did you know that you can purchase from our online store and pay via INTERNET BANKING? Its simple! Click the bank logos above to check out the new "FAQ" section for help!

Featured Products
DPR Turbo Beanies now available in 2 sizes to suit most turbos from only $139.99+gst DPR Performance fittings now available! from -4AN up.

Hosted by WeaverHosting