![Banjo fitting 7/16" to -4AN (Ball Bearing)](https://www.drivenperformance.co.nz/wp-content/uploads/nc/Banjo_fitting_KWA_M11BB-4AN.jpg "Banjo fitting 7/16" to -4AN (Ball Bearing)")
These banjo fittings come complete with banjo bolt and crush washers. They suit oil feed lines on turbos that use a 7/16 oil feed thread (such as Garrett). The banjo bolt is 7/16″ and the fitting takes a DASH4 connector. Suitable for use on ball bearing turbos as they come with built in restrictor. 1.0mm restrictor.
. The banjo bolt is 7/16″ and the fitting takes a DASH4 connector. Suitable for use on ball bearing turbos as they come with built in restrictor. 1.0mm […]){kind=link}